Touch Screen AC Refrigerant Recovery Machine With Database Printer X545
How Often Does an AC System Need to Get Recharged?
Your car’s air conditioning system is a lot like your home’s central heating and air, and even more closely resembles the system that keeps your refrigerator cool. It relies on refrigerant to operate – when the refrigerant gets.
First, understand that your system may never need to be recharged. While some amount of refrigerant loss is possible, even normal with some systems, it’s a minute amount, and it shouldn’t affect system operation. With that being said, most of us aren’t that lucky and you’ll find that your system begins to perform less and less as the years pass
To get back to the question of how often an AC system needs to be recharged, the answer is, “it depends.” There’s no service or maintenance schedule here – you don’t need to recharge your air conditioning system every year, or even every two years. The best indicator that you need to recharge the refrigerant is when the system begins to cool less than it used to, but before it stops cooling completely
Quick details :
● 10 inches’ touch screen
● Recovery, vacuum, charge
● Leakage hunting;
● Fully automatically operation;
● Larger LCD display;
● Service database, and printer
● Drain & charge compressor oil automatically;
● Incondensable gas purge automatically.
● Completely sealed oil bottles to avoid air contamination
Main Parameter :
Input power | 800W |
Recovery speed | 400g/min |
Charge Speed | 1000g/min |
Vacuum speed | 10.8m3/h |
Filter ability | 150kg |
Scale accuracy | 10g |
Cylinder capacity | 15kgs |
Machine size (D*W* H, mm) | |
Packing size: (D*W* H, mm) | 640*700*118 |
N.w./G.w.: | 82kg/89kg |
Photos:
Add Refrigerant into Refrigerant Cylinder
It must add refrigerant into the refrigerant cylinder as follows when the refrigerant quantity inside the refrigerant cylinder is not enough.
a) Regard the external refrigerant source cylinder as a part of the system and connect it with the high pressure connector ( or low pressure connector ) of the equipment.
b) Evacuate the water and air from the high pressure hose(or low pressure hose)to be connected with the equipment.
c) Open the valve on the external refrigerant source cylinder and add refrigerant into the refrigerant cylinder in accordance with the recovery procedure . After the desired quantity is recovered , close the valve on the external refrigerant source cylinder and continue the recovery process till it stops automatically.
d)Close the high pressure valve ( or the low pressure valve ) on the equipment and the procedure to add refrigerant into the refrigerant cylinder is completed.