Automatic Car Ac Recovery Air Condition Refrigerant Recovery Recycle Recharge Vacuum A/C Machine
This is a refrigerant recoverying/recycling/recharging equipment design for R134a A/C system. The unit mainly used in automobile service stations,automobile production line ect.
It is easy to connect the quick connectors of high/low pressure refrigerant to the automobile air-conditioner system.One can perform pipeline cleaning and all repairs without pipe removing and replacing.
It is efficient, time saving and labor saving.
Features:
Automatic operation reduces dependency on user
Password protection
Fully automatic single gas station for recovering, recycling and recharging R134 refrigerant
Alarm for High pressure
Full bottle
Empty bottle
Service Alarm for maintenance and filter replacement, replacement request
Automatic leak check during vacuum phase
Automatic discharge of non-condensable gases from the bottle
Main Parameter :
| Input power | 800W |
| Recovery speed | 400g/min |
| Charge Speed | 1000g/min |
| Vacuum speed | 10.8m3/h |
| Filter ability | 150kg |
| Scale accuracy | 10g |
| Cylinder capacity | 15kgs |
| Machine size (D*W* H, mm) | 790*640*1360 |
| Packing size: (D*W* H, mm) | 850*705*1460 |
| N.w./G.w.: | 105kg/120kg |
Photos:
Add Refrigerant into Refrigerant Cylinder
It must add refrigerant into the refrigerant cylinder as follows when the refrigerant quantity inside the refrigerant cylinder is not enough.
a) Regard the external refrigerant source cylinder as a part of the system and connect it with the high pressure connector ( or low pressure connector ) of the equipment.
b) Evacuate the water and air from the high pressure hose(or low pressure hose)to be connected with the equipment.
c) Open the valve on the external refrigerant source cylinder and add refrigerant into the refrigerant cylinder in accordance with the recovery procedure . After the desired quantity is recovered , close the valve on the external refrigerant source cylinder and continue the recovery process till it stops automatically.
d)Close the high pressure valve ( or the low pressure valve ) on the equipment and the procedure to add refrigerant into the refrigerant cylinder is completed.
